HOFTRONIC™ - LED High bay with sensor 150W IP65 Dimmable 5700K 190lm/W Hoftronic™ Powered 5 year warranty

Check the installation instructions for the motion sensor 2 in 1 before you start installing the sensor on the LED Highbay, so you are sure that the installation will be executed properly. With the right settings on the sensor you could save a lot of energy costs. 

LED High bay with sensor 150W IP65 Dimmable 5700K 190lm/W Hoftronic™ Powered 5 year warranty

This professional LED Highbay lamp has a power consumption of only 150 Watt. The light output is extremely high with no less than 28,500 lumens you can effortlessly illuminate all large and high spaces. The efficiency of this LED Highbay is unique with a light output of no less than 190 lumens per Watt (190lm/W) which are achieved by the High performance Bridgelux LEDs with which you achieve the highest possible efficiency in the market.

Daylight sensor

This daylight sensor is very easy to install. You connect it to the LED High bay via the already connected cable. You can set the lux value yourself on the daylight sensor so that enough artificial light shines into the room. This daylight sensor measures how much light enters the room and the sensor takes care of the amount of light. This way you save a lot of energy because the light does not burn more than necessary, so you always have enough light to work efficiently.

Installation daylight sensor 

The installation of this sensor is easy due to the included installation package, this package contains the waterproof cable connector and mounting bracket to mount the sensor on the High Bay. 

Motion sensor & daylight sensor (2 in 1)

This 2 in 1 sensor is very easy to install. You connect it to the LED High bay via the already connected cable. If you adjust the lux value as desired, the light sensor will ensure that enough artificial light shines into the room/workspace. You can set the lux value yourself on the sensor whereby this daylight sensor measures how much light enters the room/workspace and the sensor takes care of the amount of light which the High bay will shine. Via this way you save a lot of energy because the light does not shine more than necessary, so you always have enough light to work efficiently. This sensor needs to be adjusted manually, there is no remote control. 

Installation motion sensor & daylight sensor (2 in 1)

The installation of this sensor is easy by using the included installation package, which contains the moisture-proof junction box and mounting bracket for the sensor. With a detection distance of 5-7 metres under a detection range of 150°-360°, this motion detector displays a large range which allows you to set it to your wishes. The activation time of the LED High bay can be set with a minimum activation time of 10 seconds and a maximum activation time of 30 minutes.