Aigostar - LED Light hose flat 50m colour 3000K warm white 180 LEDs/m IP65 Plug & Play cut per metre

LED Light hose flat 50 meters 3000K warm white 180 LEDs per meter IP65 incl. power cable Plug & Play cut per metre

This beautiful flat LED light hose has a length of 50 meters, which means that exposing a long length is no problem at all. The advantage of this LED light hose is that it can be connected directly to the mains. This means that you do not need an LED driver for the installation of this light hose. The light hose is completely Plug & Play made making the installation very simple. A 30 cm powercable is supplied as standard.

This flat LED light hose is suitable for use both indoors and outdoors, because the light hose is fully splash-proof IP65. This is very useful when you want to create a cozy atmosphere around your home or garden with a Plug & Play light hose.

Do you need less than 50 meters? That is no problem, the light hose is cut every 1 meter by a specified cutting strip. Please note, if you want to shorten the LED hose we advise you to purchase a sealing cap with it, making sure that the cut end is finished watertight.

If you want to extend the 50 meter LED light strip, this is possible up to a maximum length of 70 metres connected to one mains power supply. To extend the light strip it is best to order this connector.

Important information for outdoor installation!

The powercable has an IP20 protection class, which means that it is only suitable for dry indoor environments. If you want to place the powercable outside, you have to place it in an IP65 splashproof junction box. It is forbidden to tape put tape over the powercable this will close off the ventilation holes and it can not ventilate sufficiently. If the powercable is placed outside the house and it is not placed in the splashproof junction box as mentioned above, all faults will not covered by the warranty.

Do you want to know where else you can mount your LED strip? Let our blog inspire you.

Mounting material

The LED light hose is supplied without mounting material. We advise you to purchase the necessary assembly materials, this ensures that you proceed through the assembly without any worries and that you can do everything according to the regulations.

• Sealing cap - for a watertight shortening of the light hose
• Connector - for connecting multiple light hose pieces
• Mounting clamps - for mounting the light hose
• Connector straight - for a watertight connection between light hose pieces
• Connector L - for a watertight connection between light hose pieces

1x LED Strip
1x Connection plug