HOFTRONIC™ - Dimmable LED Strip - 10m - RGB - 60 LEDs/m - IP65 - Plug & Play - SMD 5050 - Flex60 Series

Dimmable LED Strip 10m RGB 60 LEDs/m IP65 Plug & Play - Flex60 Series

This complete LED Strip in RGB is supplied complete including power adapter with EU plug. Use this waterproof and dimmable LED Strip if you want to create more atmosphere in your home or outside your home. This 10-meter long LED light hose can be used in many ways in your bedroom, bathroom, living room, hallway or under your bed. Thanks to the IP65 certification, you can also use this light hose outdoors or in damp rooms. This is very useful if you want to create a cozy atmosphere around your house or garden with a Plug & Play light hose.

Product features

• 60 LEDs per meter: Our Flex60 LED strips consist of 60 LEDs per meter.
• IP65 certification: You can easily make the LED strip waterproof thanks to the supplied glue.
• Light output: Thanks to the high-quality LED chips, you have a total light output of 6000 lumens.
• Energy efficient: In combination with the high light output, the Flex60 series is also very economical with a total consumption of 80 watts.
• UV resistant: The LED strip is completely UV resistant and will therefore not be weathered by sunlight.
• Plug & Play: This LED strip is completely complete and is therefore supplied Plug & Play.
• Can be shortened: The LED strip can be shortened per meter at the indicated cutting strip.
• Extendable: The LED strip can also be extended to a maximum length of no less than 100 meters.
• Dimmable: The LED strip can easily be made dimmable when you purchase the dimmer.

Flex60 equipped with 60 LEDs per meter

As the name suggests, the Flex60 series is equipped with 60 high-quality LEDs per meter. This means that with this LED strip you have a total of 600 LEDs at your disposal. These ensure that the light is perfectly distributed in the room where the LED strip is mounted.

IP65 waterproof and dustproof

This LED strip has an IP65 protection class. Do you want to use the strips outside or in a damp room? Then make sure that the connection of the power supply with the LED strip is glued closed with the supplied glue. This is of course not necessary if you want to use the strip indoors.

High light output

Thanks to the high-quality LED chips, you have a total light output of 6000 lumens. That is no less than 600 lumens per meter.

Energy efficient

Where you normally also have a high consumption with a high light output, that is not the case here. The LED strip has a total consumption of only 80 watts, which is equivalent to a low consumption of only 8 watts per meter.

Resistant to UV light

Because high-quality materials have been used, you do not have to worry about the influence of sunlight. The LED strip is completely UV resistant and will therefore not be weathered by the sun.

Plug & Play

The LED strip is Plug & Play. No more hassle with looking for the right accessories. The LED strip comes with the correct power supply and a tube of glue with which you can make your LED strip completely waterproof.

Can be shortened

The Flex60 LED strips can be shortened per meter. You can easily read this on the strip via the indicated cutting lines. Make sure that you make the end piece of the strip waterproof again with an end piece which you have to glue again with the supplied glue. The LED strip is made of maintenance-free and robust PVC material. This ensures that you will enjoy your LED strip for many years.

Renewable

If you want to connect an extra piece of LED strip, that's no problem. The LED strip is easy to extend to a length of no less than 100 meters.

Dimmable

Our Flex60 LED strip is dimmable as standard, but you have to purchase the dimmer separately for this.

Mounting material

The LED Strip comes with a mains adapter, remote control with battery and 1 end cap. If you still want to order a few extra sealing caps, you can do that below by clicking on the link. We also advise you to order mounting clips if you want to attach the LED light hose to a wall/ceiling/post. This ensures that you go through the assembly without any worries and that you connect everything according to the regulations.

• Sealing cap - for a watertight shortening of the light hose
• Connector - for connecting several light hose pieces (not watertight).
• Mounting clips - for mounting the light hose
• Power supply + Dimmer - if you want a spare power supply, you can purchase it now

//Downloads//

Assembly instructions:

Data sheet:

1x LED Strip
1x Power Cable
1x Glue Tube
1x Remote control