HOFTRONIC™ - LED fluorescent tube 150 cm - T8 (G13) - 24 Watt - 4800 Lumen - 200lm/W - High Lumen - replaces 160W (160W/860) - 6000K - flicker-free

High Lumen LED T8 Fluorescent Tube 150cm - 24 Watt 4800 Lumen (200lm/W) - 6000K Daylight White Light - Flicker Free - Includes Dummy Starter

This very competitively priced 150cm T8 LED fluorescent tube is certainly not inferior to aluminium LED fluorescent tubes. The tube is made from V0 fire retardant plastic and consumes only 24 watts. It produces 4800 lumens of light, replacing a 160 watt fluorescent tube. Up to 80% energy saving. The plastic used is frosted which gives a well distributed diffused light.

Product features

• Daylight white light colour: This LED tube emits a daylight white light of 6000K. This light colour is widely used in places where there is little daylight. This light colour replaces the traditional 860 light colour one to one.
• Insulated driver: The driver of this tube is insulated in the end cap, so the heat from the driver cannot burn the LED chips in the tube.
• Wide beam angle: With a wide beam angle of 320 degrees, the tube can illuminate large areas.
• 100% flicker free: You won't suffer from fatigue, headaches or other discomfort. Also suitable for use in stables.
• Plug and play: Thanks to the starter supplied, the tubes can be installed in your old fluorescent fixture without major modifications.
• Fire resistant V0 plastic: The plastic tube is much safer than glass tubes. The fire-resistant material ensures that the tube will not burst if it overheats.
• Diffused light: The polycarbonate diffuser is completely diffuse. As a result, you will not see any points of light inside the tube and it gives a very even light.
• T8 fitting: The tube has a T8 lampholder, which is exactly the same lampholder as the old fashioned G13 lampholder. So you can replace your current G13 LED tube 1:1 with this T8 tube.
• Up to 80% savings: The tube consumes 24 watts, replacing a traditional 160 watt fluorescent tube. As a result, you can save up to 80% on energy costs.
• Power factor >0.9: This high power factor is ideal for large installations as it allows you to connect more tubes to a group.
• Lasts up to 12 years: The LED tube has 30,000 burning hours. If you leave it on for 10 hours a day, 250 days a year, it will last up to 12 years.
• Highly efficient: The tube has an efficiency of 200 lumens per watt. This equates to a total light output of 4800 lumens.
• Certificates: The tubes are carefully tested and therefore have all the important certificates: CE, EMC, RoHS, LM80, TÜV.

Insulated driver

The T8 lamp is mounted on an end cap. The driver of the tube is also mounted in this end cap. The end cap is insulated from the illuminated part of the tube. This ensures that the heat generated by the driver does not affect the LED chips in the tube. In other words, the isolated manufacture of the driver ensures that the LED chips cannot be burned by the heat from the driver.

Easy installation and 1:1 replacement

Thanks to the included dummy starter, you can connect this LED fluorescent tube directly to a traditional T8 luminaire. There are several installation options. We have explained these in our blog: Replacing fluorescent tubes with LED tubes.

Long life and warranty

The LED tube light is manufactured using the most advanced LED chips. As a result, the LED fluorescent tube has a lifetime of no less than 30,000 hours and 100,000 switching cycles. So this LED tube will easily last 12 years. Should something go wrong sooner? Then you can count on a 3 year warranty.

Product benefits

• Patented flicker free technology
• V0 flame-retardant and shatterproof plastic
• Designed for better heat dissipation
• Easy to install
• Long life of 30,000 hours
• Includes LED starter