HOFTRONIC™ - Londen - LED floodlight with movement sensor - Incl. light sensor - IP65 waterproof - Tiltlable - 2500 lumen - 3000K warm white light - 30 watts - Black - Outdoor lamp - 5-year warranty

Outdoor lamp with light sensor

The Londen LED floodlight is a functional wall light with a powerful light output of no less than 2500 lumens. The lamp has a light source that can be tilted both vertically (135 degrees) and horizontally. With its built-in motion and twilight sensor, the Londen will automatically switch on when it gets dark or when the sensor detects movement. The twilight switch-on level and duration can be set as desired. This makes the lamp ideal for security lighting, especially in places where extra security is needed around a home or business. The sensor outdoor light provides enough light to properly illuminate an area such as your driveway or carport. Thanks to LED technology, it only uses 40 watts, which is good for the environment and good for your wallet! Despite its high brightness, the floodlight emits off a warm white light of 3000K. And thanks to its IP65 protection rating, the lamp is waterproof, so you can leave it hanging outside all year round.

Product benefits

• High light output: This outdoor light has a light output of no less than 2500 lumens. This is more than enough to properly illuminate a large area such as your driveway or garage.
• Adjustable light sensor: The Londen wall light automatically switches on at dusk. You can set the twilight or light level at which the light switches on.
• Adjustable motion sensor: The Londen outdoor light has a powerful motion sensor with a detection range of 5 to 10 metres at an angle of no less than 240 degrees. You can adjust this range to suit your needs.
• Pointable sensor: Use the special cap to direct the sensor. This way the light only activates when motion is detected from a specific direction, like your own driveway, rather than the neighbouring one. 
  Adjustable duration: Avoid wasting energy and decide how long the light stays on after motion is no longer detected. You can set it from 10 seconds to 15 minutes.
• 240° detection angle: The sensor has a detection angle of 240 degrees. This allows the lamp to detect movement from wall to wall.
• IP65 waterproof: The floodlight has an IP65 rating, making it suitable for outdoor use, even in rain or snow.
• 3000K warm white light: The Londen LED floodlight produces an atmospheric warm white light. This makes it ideal for hanging by the front door, garage or shed, giving you enough light without being too bright.
• Tiltable: You can tilt the LED floodlight both horizontally and vertically to direct the light exactly where you want it.
• Easy to install: The Londen LED floodlight is easy to install. Simply unscrew the backplate, pull the cable through and remount the backplate to the wall. Then screw the luminaire back into place.
• 2 mounting options: Mount the floodlight on a flat wall or just in a corner to illuminate two parts of an outdoor space at the same time.
• Connect to other lights: As the LED floodlight has both an input and an output for the power cable, you can easily connect it to other lights without having to connect each light separately to the same socket.
• Connect to lights without a sensor: The Londen can even be linked to lights without a sensor. This allows you to use the light as a separate motion detector and twilight switch.
• Flexible mounting: The lamp has no less than 8 inlets and outlets for the power cables, 2 at the back, bottom and both sides. This means you can always mount the lamp nice and flat on the wall. 
  Polycarbonate & Aluminium: This outdoor light is made from moisture resistant materials, so it will not rust easily.
• Very well made: By using the highest quality materials, we guarantee a product that will give you years of enjoyment.
• Environmentally friendly & cost-effective: This lamp's LED technology and integrated sensors make it highly energy-efficient. It benefits not only the environment but also your wallet!
• 5-year warranty: At INTOLED, we deliver only the best quality, which is why this lamp comes with a 5-year warranty. Should anything break during these 5 years, we will replace it for free.

Adjustable motion detector and twilight switch

The Londen LED floodlight has both a motion sensor and a twilight switch. This means that the light reacts when it gets dark in the evening, but also switches on when it detects movement. The adjustable detection distance at the bottom of the lamp allows you to set the distance (5 to 10 metres) to the movement to be detected. This prevents the light from switching on when a car passes or someone walks on the pavement.

The light also comes with a convenient cap for the sensor, allowing you to adjust it to detect motion only at a specific angle. This feature is particularly useful if your neighbour's driveway is right next to yours, and you wish the light to activate solely when a car is driving up your driveway. You can easily remove the cap, so the sensor can detect any motion in 360 degrees around the lamp.

You can also set the twilight switch to your own preference by adjusting the number of lux. If you set the lux level very low, the sensor will switch on the light when it is very dark outside (3 lux). Do you turn the knob all the way towards the sun? Then the sensor will switch on the lamp when it is still quite bright (> 300 lux) and the lamp will switch on at the slightest twilight. Finally, you can set how long the lamp stays on after it detects no movement. This saves money and energy by not leaving the floodlight on unnecessarily.

Flexible beam direction

The Londen LED floodlight not only boasts a beautiful and sleek design but also offers flexibility. You can tilt the lamp's light panel both horizontally and vertically, allowing you to direct the light beam precisely where it's needed. The floodlight emits a robust 2500 lumens, making it primarily a functional lamp that enhances safety and security in outdoor areas.

Applications:

• Driveway
• Front door
• Side facades
• High fences
• Garages
• Garden sheds
• Carports
• Backyard
• Front garden
• Bicycle sheds
• Business premises
• Car park
• Entrance doors

Easy installation on a flat wall or corner

The Londen LED floodlight offers two mounting options. It can be mounted to any flat wall or partition. Additionally, due to its broad beam angle and 240-degree coverage, it is particularly suitable for corner wall mounting. This positioning enables the simultaneous illumination of two separate outdoor areas from a single location. For corner mounting, a distinct mounting bracket is provided.

The floodlight features two distinct cable openings: one for power input and another for power output.
This makes it easy to connect multiple lamps to the wall light, without having to connect each lamp to an individual power source. Additionally, it's possible to link several lamps without sensors to a wall light. These lamps will activate alongside the sensor-equipped lights when motion or twilight is detected by the Londen sensor. Consequently, you could have a sequence of lights installed along your fence that illuminate upon detecting movement.

Please note! The maximum wattage for interconnection should not exceed 500 watts.

The Londen LED floodlight is easy to install:

1. Turn off the mains power supply.
2. Unscrew the backplate and thread the power cables through the opening in the plate.
   NOTE. You can also route the wires though the bottom or sides of the lamp. For this, special places are provided, which should be drilled from the inside first.
3. Connect the power wires following the wiring diagram provided in the manual.
4. Mount the plate to the wall with supplied screws and wall plugs, ensuring the height is between 1.8 and 2.5 metres.
5. Reattach the floodlight to the plate.
6. Restore the power supply. Good to know: The sensor needs about 30 seconds to warm up before it becomes operational.